Seminar Celik Kepenggunaan – Hubungan reka bentuk produk ergonomik berpusatkan pengguna ke atas pembelian dalam talian

Pada 23 Jun 2023, HFEM dengan kerjasama Community Resiliance and Experential  Learning (CARE) dan Fakulti Kejuruteraan & Teknologi Mekanikal, UniMAP, dan Kolej Komuniti Bandar Darulaman telah menganjurkan kursus jangka pendek sempena ‘National Training Week (NTW) 2023. Program ini mendapat tajaan geran daripada Kementerian Kepenggunaan Dalam Negeri dan Kos Sara Hidup (KPDN).

Program yang dianjurkan secara atas talian ini dihadiri oleh 64 orang peserta yang terdiri daripada ahli Persatuan Isteri dan Kakitangan Wanita UniMAP (PISKANITA) dan warga UniMAP.

Pengisian program ini disampaikan oleh Ts. Norashiken binti Othman dan Prof Madya Ts Dr. Noormaizatul Akmar binti Ishak dari UniMAP.

………………

Modul 1: Pengenalan: Pemerkasaan Pengguna

Modul 2: Ergonomik, Faktor Manusia berpusatkan pengguna:

  • Faktor manusia dan ergonomik berpusatkan pengguna dalam Reka Bentuk Produk.
  • Pengaruh faktor manusia dan ergonomik berpusatkan pengguna dalam tingkahlaku keputusan pembelian dalam talian.

Modul 3: Ergonomik, Faktor Manusia & Keselamatan:

  • Kecederaan dan Kemalangan akibat rekabentuk yang tidak selamat.
  • Akta dan Standard Keselamatan dan Ergonomik Produk Pengguna
Modul 4: Pengaruh Keputusan Pembelian ke atas Kesedaran Kewangan:

  • Tingkahlaku Pembelian dalam talian: Kemahuan versus Keperluan
  • Kesan Perbelanjaan di luar kawalan ke atas taraf kewangan

Modul 5: Etika Kepenggunaan

  • Pengaruh gelagat pembelian pengguna ke atas strategi perniagaan dalam talian.
  • Etika pereka bentuk, pengeluar produk dan peniaga dalam mempengaruhi   pengguna dalam talian.

Latest post

Seminar Celik Kepenggunaan: Hubungan Faktor Manusia Berpusatkan Pengguna – Reka Bentuk Produk dalam Mempengaruhi Keputusan Pembelian Dalam Talian dan lmpak ke atas Kewangan lndividu

Pada 16 Jun 2023, HFEM melalui Special Interest Group (SIG) EinDfA dengan kerjasama Kementerian Dalam Negeri (KDN) dan Fakulti Kejuruteraan dan Teknologi Mekanikal, UniMAP telah menganjurkan satu seminar atas talian bertajuk Seminar Celik Kepenggunaan: Hubungan Faktor Manusia Berpusatkan Pengguna – Reka Bentuk Produk dalam Mempengaruhi Keputusan Pembelian Dalam Talian dan lmpak ke atas Kewangan lndividu.

Seminar ini telah disampaikan oleh Ts. Norashiken binti Othman dari UniMAP.

Seminar ini diikuti oleh seramai 595 orang pelajar UniMAP, terutamanya dari Fakulti Perniagaan dan Komunikasi.

 

Latest post

Workplace Ergonomics Controls In Manufacturing Industry-Outcome Based Processes Seminar

HFEM in collaboration with SOCSO has successfully organized a Seminar on Workplace Ergonomics Controls in Manufacturing Industry – Outcome Based Processes on 27th October 2022. The seminar was held at Sri Putra 5 @ LR 2, Bangunan TNCPI, UPM Serdang, Selangor.

The invited speakers were Ts. Muhammad Naqiuddin (ErgoLead), Dr Radin Zaid Radin Umar (UTeM), and Ts. Mohd Asyraf Che Doi (UniMAP).

 

*Objektif seminar ini diadakan adalah untuk: 
  • Membincangkan cabaran, jurang, dan penghalang yang dialami oleh pengamal industri khususnya berkenaan kawalan ergonomik di tempat kerja didalam industri pembuatan.
  • Menerangkan proses berasaskan hasil (outcome based) terutamanya di dalam program kawalan ergonomik di tempat kerja.
  • Melakukan perkongsian kajian kes berkenaan program kawalan ergonomik tempat kerja dari segi rekabentuk, program kembali bekerja (return to work) dan pengurusan kes kepada pekerja yang telah mendapat penyakit otot rangka (musculoskeletal disorder, MSD).
 

Latest post

Commercial Vehicle Safety Forum 2022 (CVSF)

Seminar: Commercial Vehicle Safety Forum

15 Aug 2022

Venue : College of Engineering, UiTM Shah Alam, Selangor
Mode  : Face-to-face

Book your seat now.

Please visit our registration form or scan the QR code in the event brochure.

Calling for Participants!

On 15th August 2022, HFEM in collaboration with the College of Engineering, UiTM had organized the Seminar on Commercial Vehicle Safety Forum. The seminar was held at College of Engineering, UiTM Shah Alam, Selangor. Five presenters had delivered their experience and knowledge sharing, and the program was closed by the forum session by all the presenters. 

Presentation 1: Mr. Mohd Najeeb Rosli, Principal Consultant KPX Sdn. Bhd.

Presentation 2: Mr. Aqbal Hafeez Ariffin, Head of Commercial Vehicle Unit, MIROS

Presentation 3: Dr. Khairil Idham Ismail, Occupational Health Doctor

Presentation 4: Assoc. Prof. Ir. Ts. Dr. Fadhlan Hafizhelmi Kamaru Zaman, Vehicle Intelligence and Telematics Lab (VITAL, UiTM)

Presentation 5: Tuan Hj. Idros Puteh, Scania Strategic Customer Development Director at Scania Southeast Asia

Forum session: Commercial vehicle & Fatigue Management is chaired by Assoc. Prof. Dr. Wan Mazlina Wan Mohamed, Head of Consultancy, MITRANS, UiTM.

 

Latest events

Human Factors and Ergonomics Seminar 2022

Date: 28-29th September 2022

Venue: Auditorium Rashdan Baba, Bangunan TNCPI, Universiti Putra Malaysia [Location maps]

Download Full Brochure Here

 

Latest post

Seminar: Nurturing Human Factors & Ergonomics in Design Ideas

SIG Ergonomics in Design for All brings to you a free 4-session seminar on Nurturing Human Factors and Ergonomics in Design Ideas.

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
E-Certificate will be given to all participants
 

Latest post

Heavy Goods Vehicle Safety Seminar 2020

HFEM in collaboration with SOCSO would like to invite you to participate in the Heavy Goods Vehicle Safety Seminar
 
Date: 9th November 2020
 
Venue: Faculty of Mechanical Engineering, UiTM Shah Alam, Selangor
 
This seminar offers a platform for researchers, policymakers, regulators, road agencies, heavy vehicle manufacturers and suppliers, transport industry, safety & health officers (SHOs) and committee members, and OSH practitioners to exchange knowledge and experiences related to heavy goods vehicle.
 
To Register please visit: http://bit.ly/HGVsafetyseminar OR scan the QR code as in the event brochure.
 

Latest post

Human Factors and Ergonomics Seminar 2020

Latest post

National Human Factors and Ergonomics Seminar 2019

Category: Public Ergonomics Seminar
Date: 22nd-23rd October 2019
Venue: UPM Serdang, Selangor

As an annual event, Human Factors and Ergonomics Society Malaysia organized National Human Factors and Ergonomics Seminar on 22-23 October 2019 which took place at Auditorium Rashdan Baba, Universiti Putra Malaysa with the theme “Ergonomics Beyond Efficiency”.

There were 10 speakers in total which from Malaysia, Hong Kong, India, Indonesia and Thailand. Dr. Ng Yee Guan, the President of HFEM did the opening speech and share with the crowd the direction of HFEM in Malaysia.

The seminar was continued with the presentation by the Past President of HFEM, Prof. Dr. Shamsul Bahri Md Tamrin with the titled Ergonomics Assessment: The Current Methodology, Future Competency as Assessor and International Certification. He explained in detail the direction of ergonomics competency in Malaysia and compare with the Ergonomics competency in the neighboring countries. He also mentioned that Department of Occupational Safety and Health moving towards Ergonomics as a OSH competency in Malaysia and there will be Industrial Code of Practices on Ergonomics in the near future.

Mr Fauzi Yahaya, Senior Director in Mimos Berhad, also past president of HFEM took the stage with presentation titled “Ergonomics in the 4 IR Era”. He shared the role of ergonomics in IR 4.0 and how the shift is happening in technologies in the 4th IR era which is related with ergonomics. It seems that MNC is having a rapid IR 4.0 technological implementation whereas SMEs adoption is still way behind. He concluded his session with a message of regardless of the advancement in technologies, human factors including attitude and conscience plays a critical role towards betterment of well beings.

The seminar then continued with Assoc. Prof. Dr. Wattana Jalayondeja from Mahidol University which discuss about the break reminder for the office workers. His team’s contribution was in the development of software for reminding office workers to frequently took break and perform exercise to battle the prolong sitting which is currently know as one of major problem in organization.

Topic on fatigue management was presented by Assoc. Prof. Dr Yassierli from our neighboring country, Indonesia. His highlight was, his journey from year 1995 until now in the field of fatigue management and how it has progressed to fatigue indicators, fatigue intervention, mental fatigue and now focus on daily fit to work from the aspect of physical and mental. At the end, he put forward the current challenges in fatigue management which need to be addressed as listed below:

  • How to monitor fatigue at work
  • How to develop an effective fit-for-duty assessment tool
  • How to increase fit-for-duty & awareness at work

Then, the last 2 sessions were delivered by Malaysian government and agency official which were Ir. Haji Omar Mat Piah, Director General, DOSH and Dr. Edrin Nazri Abdul Rasib, SOCSO. Director General of DOSH shared the role of DOSH in ergonomics implementation and also further confirmed that ICOP on Ergonomics will be implemented in 2 years’ time and as for the regulation of Ergonomics will take more time since it involved parliament’s approval.

Dr. Edrin gave the last speech for the first day about the compensation claims on Musculoskeletal Disorders in Malaysia.

In the second day, the speakers line up were Prof. Dr. Debkumar Chakrabarti (India), Assoc. Prof. Dr. Lilis Surienty (USM, Malaysia), Prof. Dr Ravindra Goonetilleke (Hong Kong), Ir. Mohd Hafzi Md Isa (MIROS, Malaysia) and Assoc. Prof. Dr. Stephen Poon (APUTI, Malaysia).

Prof. Dr. Debkumar highlighted the importance of simple ergonomics design to ease daily life and also the PhD program in Ergonomics in India. Assoc. Prof. Dr. Lilis Surienty shared her experiences in conducting research in shiftwork and the dilemmas in shiftwork implementation in Malaysia. She called for more research addressing shiftwork issues in Malaysia.

Prof. Dr Ravindra Goonetilleke made a remarkable note and challenges the current research in Ergonomics which still discussing the limitation of human and musculoskeletal disorders which has been discussed since 1760 by Bernardino Ramazzini. He pointed out that the Ergonomics direction should be increasing the performance and focus on the developing the strength, capabilities and capacities.

Ir. Mohd Hafzi Md Isa presented how human factors and influenced driving safety. The speaker for the seminar was Dr. Stephen Poon who gave his insight about user experience design and the IR 4.0.

Overall, it was a great event organized by HFEM with a lot information sharing and eye opening to the participants and kudos to all the organizing team.

T.Hari Krishnan

Latest post

Seminar: Commercial Vehicle Safety Forum 2019

SIG Transportation and Malaysian Institute of Transports (MITRANS), UiTM bring to you a Commercial Vehicle Safety Forum 2019.

Latest post